 |
PLC Single Circuit Track TR - 3 Wire Single Circuit Track System. Halo Comapatible
20 Amp circuit capacity. tracks
include 1 dead end cap and
mounting hardware
(5/8”h x 1-3/8”w)
Fully polarized, low profile and grounded system which accommodates broad selection and exceptional styling on Low and High voltage track lights. All track products are created to confirm with all UL standards. Suitable for wide range of commercial merchandising and residential applications.
Note: TR72/6FT and TR96/8FT in Polished Brass finish not available.
Alternative:-In place of TR72/6FT-Can Order Qty-1 of TR24/2FT-PB and TR48/4FT-PB (Polished Brass) with TR129-Mini Joiner.
In Place of TR96/8FT- Can order Qty-2 of TR48/4FT-PB(Polished Brass) with TR129-Mini Joiner

|
 |
 |
PLC TR110 Single Circuit 12 Ft. Track TR - 3 Wire Single Circuit Track System. Halo Compatible
20 Amp circuit capacity. tracks
include 1 dead end cap and
mounting hardware
(5/8”h x 1-3/8”w)
Fully polarized, low profile and grounded system which accommodates broad selection and exceptional styling on Low and High voltage track lights. All track products are created to confirm with all UL standards. Suitable for wide range of commercial merchandising and residential applications.

|
 |
 |
TR126 Floating power feed Canopy FLOATING CANOPY
Floating power feed. Allows connecting
the track to the electric box at any point
of track. Includes canopy, mounting
hardware and extra end cap.

|
 |
 |
TR127 Live End Power Feed LIVE END
End power feed to start a run.
(Adds 2 3/4” to length.)

|
 |
 |
TR128 End Power Feed Conduit END POWER FEED CONDUIT
End power feed. Accepts 1/2” trade size
conduit fitter. Use with surface conduit
system.

|
 |
 |
TR129 Mini Joiner MINI JOINER
Mini joiner to connect two track sections
end to end. (Adds 1/8” to length – not a
power feed.)

|
 |
 |
TR130 Straight Connector with power feed STRAIGHT CONNECTOR WITH POWER
Straight connector with power feed to
connect two track sections end to end.
(Adds 4” to length)

|
 |
 |
TR131 “L” connector with power feed L CONNECTOR
“L” connector with power feed to
connect two track sections at a 90?
angle. Field adjustable for right and left
hand applications.

|
 |
 |
TR132 “T” connector with power feed T CONNECTOR
“T” connector with power feed to
connect three track sections at a “T”
configuration. Field adjustable for right
and left hand applications.

|
 |
 |
TR133 “X” connector with power feed X CONNECTOR
“X” connector with power feed to connect
four track sections into a cross
configuration.

|
 |
 |
TR134 Flexible connector with power feed FLEXIBLE CONNECTOR
Flexible connector with power feed
to connect two tracks at any angle up to
90° or wall to ceiling or pitched ceiling
applications.

|
 |
 |
TR135 Live End With Cord & Plug LIVE END W. CORD & PLUG SET
12’ grounded cord and plug attached to
a live end connector. (10 amp capacity)

|
 |
 |
TR137 Outlet box cover OUTLET BOX COVER
Outlet box cover. Can be used at any
feed connection point (TR127, TR130,
TR131, TR132 and TR133).
Screws included.

|
 |
 |
TR136 Line Voltage Monopoint Canopy MONOPOINT
Canopy adapter with power feeder
mounts permanently to outlet box.
Allows any lampholder to be converted
to canopy installation.

|
 |
 |
TR152 Low Voltage Monopoint Canopy LOW VOLTAGE MONOPOINT
Low voltage canopy adapter with
power feeder mounts permanently to
outlet box. Allows any low voltage
lampholder to be converted to canopy
installation.

|
 |
 |
TR138 Dead End Cap Dead end cap.

|
 |
 |
TR139 Outlet Adapter OUTLET ADAPTOR
Outlet adapter provides electrical
receptacle.

|
 |
 |
TR140 Track Pendant adapter TRAC PENDANT ADAPTOR
Pendant adapter for chin-hung fixture up
to 35 lbs. with power feed. (Hook
removes for cable-hung fixtures)

|
 |
 |
TR141Track Suspension 18" PENDANT ASSEMBLY
To suspend track from ceiling. 2 kits per
2’ and 4’ track and 3 kits per 6’ and 8’
track. (Canopy and hardware included)

|
 |
 |
TR142 Wire Cover WIRE COVER
For pendant assembly kit. (One for each
live end)

|
 |
 |
TR144 T-bar attachment clip T-bar attachment clip. 2 per 2’ and 4’
track sections. 3 per 6’ and 8’ track
sections.

|
 |
 |
TR146 Slope Canopy Pendant Adapter SLOPE CANOPY
Slope pendant adapter. To be used with
TR-141, TR-148, TR-149 and TR-150.
Canopy not included)

|
 |
 |
TR147 4 Ft. Steel Stem 48" ADD-ON STEM
48” steel stem For additional length can be field cut and threaded. Coupling included.

|
 |
 |
TR151 MR16 HEXCEL LOUVER MR16 HEXCEL LOUVER

|
 |
 |
TR153 End feed box T-BAR POWER FEED
End feed box for use with T-bar ceiling.
(Power feed not included)

|
 |
 |
TR154 Low voltage pendant adapter LOW VOLTAGE PENDANT ADAPTOR
Low voltage pendant adapter for fixture
up to 35 lbs. with power feed. (Hook
removes for cable-hung fixtures).
50 watt transformer included.

|
 |
 |
TRACK EXTENSION ROD 18" EXTENSION ROD

|
 |